Schwinn created the ultimate exercise machine, when they put the Schwinn Airdyne Exercise bike on the market in the late 1970's. It has since become the most common form of fitness as far as exercise bikes. The Airdyne has no resistance parts, and gets all its resistance from air.
These bikes have been around since the late 70's and since that time replacement parts have remained basically the same. They still use wedge pins in the crank arms, and a two crank system with a left and right eccentric arm. The grips have remained the same as well as the connecting arms, pivot bolts and lever arms.
We not only carry repair items for exercisers but we know how to fix them and have available the nuts, lockwashers and oilite bearings, and chains you will need when you repair your equipment. Please feel free to call us at +1 (410) 859-3538
The universal design of the CWP-7C has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive, Octalink) crank arms. The CWP-7C will replace the current CWP-6C
Based on 0 reviews
Share your review on Facebook and get voucher for discount
1 $(Tax Included)
valid for 365 days